AEG FAVORIT 78400 VI0P User Manual Download Page 10

6.2 

Filling the salt container

1.

Turn the cap counterclockwise and
open the salt container.

2.

Put 1 litre of water in the salt con-
tainer (only for the first time).

3.

Fill the salt container with dishwash-
er salt.

4.

Remove the salt around the opening
of the salt container.

5.

Turn the cap clockwise to close the
salt container.

CAUTION!

Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.

6.3 

Filling the rinse aid dispenser

M AX

1

2

3

4

+

-

A

B

D

C

1.

Press the release button (

D

) to open

the lid (

C

).

2.

Fill the rinse aid dispenser (

A

), no

more than the mark 'max'.

3.

Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.

4.

Close the lid. Make sure that the re-
lease button locks into position.

You can turn the selector of the
released quantity (

B

) between

position 1 (lowest quantity) and
position 4 (highest quantity).

7. 

DAILY USE

1.

Open the water tap.

2.

Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer
to ’Setting and starting a pro-
gramme’.
• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3.

Load the baskets.

4.

Add the detergent.
• If you use the combi detergent

tablets, activate the multitab op-
tion.

10 www.aeg.com

Summary of Contents for FAVORIT 78400 VI0P





















Reviews: