20
Starting a dishwashing cycle
1.
Check that the spray arms can turn freely.
2.
Turn the water tap on fully.
3.
Press the ON/OFF button.
4.
Select the desired cycle.
The programme indicator comes on. The remaining time expected for
the cycle will be shown in the multi-display.
3
During the dishwashing cycle, the remaining time shown in the multi-
display may be adjusted according to the size of the load, degree of
soiling, etc.
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely
necessary.
Interrupting the dishwashing programme by opening the dishwash-
er door
1
Hot steam may escape when the door is opened. There is a risk of scald-
ing.
1.
Open the door carefully. The dishwashing cycle will stop.
2.
Close the door. The cycle will continue.
Aborting the dishwashing cycle
1.
Press function buttons
2
and
3
and keep them pressed.
The LED indicators of all the buttons that can be selected light up.
Exception: The 3in1 button will only illuminate if the function has been
activated.
2.
Release the function buttons. The dishwashing cycle has been can-
celled.
3.
If you want to start a new cycle, check whether there is any detergent
in the dispenser.
4.
Switch off using the ON/OFF button.
Setting the Delay Timer
3
With the delay timer you can delay the start of a dishwashing cycle for
between 1 and 19 hours.
1.
Press the Delay Timer button repeatedly until the multi-display shows
the desired time delay, for example
12h
, if the cycle is to start in
12 hours. The Delay Timer indicator is illuminated.