manualshive.com logo in svg

AEG FAVORIT 65060 IL, Instruction Book, Page: 25 / 48

Share
Download
AEG FAVORIT 65060 IL Instruction Book Download Page 25

Operating instructions

25

Use of "3 in 1" combi detergents 

General advice

These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.

1.

Before using these products you should first check that the water 
hardness in your supply is compatible with the use of these products
as per the detergent manufacturers (on the product packaging).

2.

These products should be strictly used according to the detergent 
manufacturers instructions.

3.

If you encounter problems when using 3 in 1 products for the first 
time then please contact the detergent manufacturers care line 
(the telephone number is given on the product packaging).

Special advice

When using combination 3 in 1 products select the lowest possible
setting for water hardness.
If you decide to turn back to the use of the standard detergent system
we advise that you:

●

Refill both the salt container and rinse aid dispenser.

●

Switch the water hardness setting to the highest possible position 
and run from 1 to 3 normal washing programmes without a load.

●

Readjust the water hardness setting again according to the 
hardness of the water in your area.

152964 48/0en  27-02-2004  9:04  Pagina 25

Summary of Contents for FAVORIT 65060 IL

















































Reviews:

No comments