AEG FAVORIT 65040 I, User Manual, Page: 25 / 52

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
< 4 < 7 < 0.7 < 5
1
2)
1
2)
1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold Delay and Start at
the same time until the indicators ( A ),
( B ) and ( C ) flash.
4. Press Program .
• The indicators ( B ) and ( C ) go off.
• The indicator ( A ) continues to flash.
• The display shows the setting of
the water softener. Example: =
level 5.
5. Press Program again and again to
change the setting.
6. Deactivate the appliance to confirm.
ENGLISH
25