Operating instructions
9
Setting electronically:
1.
Press the ON/OFF button.
If indicators other than the ON/OFF button are lit, a programme has
been selected. The programme must be cancelled:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
2.
Press function buttons 1 and 2 simultaneously and keep them
pressed. The LED indicators for function buttons 1 to 3 will flash.
3.
Press function button 1 again.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4.
Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5.
When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the
control indicator for special salt.
Adjusting the hardness
setting
10
9
8
7
6
3
1
no salt
necessary
Manual
Electronic
*2
1
Indication on
the
multidisplay
2
Water hardness
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
11 - 14
1,9 - 2,5
II
unter 4
unter 0,7
I
4 - 10
0,7 - 1,8
I/II
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2
III
*5
4
in °d 1
in mmol/l 2
Range
1) (°d) German degree, measure of water hardness
2) (mmol/l) millimol per litre, international unit for water hardness
*) factory setting
152967 84/1en 1-12-2003 12:04 Pagina 9