manualshive.com logo in svg

AEG FAVORIT 64470 I, User Information, Page: 24 / 36

Share
Download
AEG FAVORIT 64470 I User Information Download Page 24

Operating instructions

24

Malfunction

The programme is not
starting.

Rust spots are visible in
washing compartment.

Rust spots in the washing
compartment are from
particles from outside the
appliance (rust particles
from the water pipe, from
pans, cutlery, etc). Remove
such spots with a
commercially available
stainless steel cleaner.

Only wash cutlery and dishes
that are suitable for dish-
washer use.

Close the lid of the special
salt container securely.

If dishes are to be washed
immediately cancel delay
start timer.

In the case of dishwasher
models with start delay
timer: 
A start delay is selected.

Mains plug is not plugged in.

House fuse in defective.

The whistling is not a cause
for concern.

There is a whistling
noise during washing.

Use a different brand of
detergent.

Insert mains plug.

The door of the dishwasher
is not closed properly.

Shut the door.

Replace fuse.

Possible cause

Remedy

Fault code

is

displayed in the multi-
display.

The indicator for the
selected programme is
flashing; error code

is displayed in the

multi-display.

The water drain hose
has not been correctly
laid.

Check hose installation.

The leak prevention system
has been triggered.

Turn off the tap and contact
your local Service Force
Centre.

The siphon is blocked.

Clean out siphon.

152967 82/0en  1-12-2003  11:17  Pagina 24

Summary of Contents for FAVORIT 64470 I





































Reviews:

No comments