Operating Instructions
12
Set water softener
Using the table as a guide, adjust the water softener to that which cor-
responds to the hardness of the water in your area:
0
The dishwasher must be switched off.
Manual setting:
1.
Open the dishwasher door.
2.
Remove the lower rack from the dis-
hwasher.
3.
Turn the hardness range switch to 0
or 1 (see table).
4.
Replace the lower rack.
Electronic setting:
1.
Press the ON/OFF button.
The LED in the ON/OFF button will become illuminated.
3
If other indicators are also illuminated, this means that a dishwashing
cycle has been activated. The dishwashing cycle must be cancelled:
Press function buttons
1
and
2
simultaneously for approx. 2 seconds.
All other indicators will go out.
2.
Press the function buttons
1
and
2
simultaneously and keep them pres-
sed.
The LED indicators in function buttons 1 to 3 will flash.
3.
Press function button
1
again.
The LED indicator for function button
1
will flash.
The multi-display will indicate the hardness setting.
4.
Pressing function button
1
increases the hardness setting by 1 degree.
(Exception: hardness setting 1 follows hardness setting 10).
5.
When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.