5.
Set and start the correct programme
for the type of load and the degree
of soil.
7.1
Using the detergent
20
30
M AX
1
2
3
4
+
-
A
B
C
1.
Press the release button (
B
) to open
the lid (
C
).
2.
Put the detergent in the compart-
ment (
A
) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4.
If you use detergent tablets, put the
tablet in the compartment (
A
).
5.
Close the lid. Make sure that the re-
lease button locks into position.
7.2
Setting and starting a
programme
Setting mode
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation all the programme in-
dicators come on.
If the control panel shows other condi-
tions, press and hold at the same time
buttons
and
until the
appliance is in setting mode.
Starting a programme without
delay start
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode.
3.
Set the programme.
• The related programme indicator
comes on.
• The programme duration flashes in
the display.
4.
Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
shows the programme duration
that decreases with steps of 1 mi-
nute.
Starting a programme with
delay start
1.
Set the programme.
2.
Press the delay button again and
again until the display shows the de-
lay time you want to set (from 1 to 24
hours).
• The delay time flashes in the dis-
play.
• The delay indicator is on.
3.
Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
start that decreases with steps of 1
hours.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
When you cancel a delay start, the appli-
ance goes back to setting mode. You
have to set the programme again.
10 www.aeg.com