Water hardness
Water hardness ad
-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l
Clarke de
-
grees
manually
elec
-
troni
-
cally
4 - 10
7 - 18
0,7 - 1,8
5 - 12
1
2
< 4
< 7
< 0,7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Turn the programme knob clockwise until the display shows two horizontal status bar.
4. Press and hold the Multitab button and the Delay button at the same time until the
indicators ,
and flash.
5. Release the Multitab button and the Delay button .
6. Press the Multitab button,
• The indicators
and go off.
• The indicator
continues to flash.
• The display shows the setting of the water softener (example:
= level 5).
7. Press the Multitab button again and again to change the setting.
8. Deactivate the appliance to confirm.
If the water softener is set electronically to the level 1, the salt indicator stays off.
Setting the water softener
11