AEG FAVORIT 55020 W0P User Manual Download Page 7

3) 

With this programme you can wash a load with fresh soil. It gives good washing results

in a short time.

4) 

With this programme you have the most efficient use of water and energy consumption

for crockery and cutlery with normal soil. (This is the standard programme for test
institutes).

5) 

This programme has a high temperature rinsing phase for better hygiene results. During

the rinsing phase, the temperature stays at 70 °C for at least 10 minutes

6) 

Use this programme to quickly rinse the dishes. This prevents the remaining food to

bond on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.

Information for test institutes

For all the necessary information for test performance. send an email to:

[email protected]

Write down the product number (PNC) that is on the rating plate.

5. 

OPTIONS

Activate the Multitab option be-
fore you set a programme. You
cannot activate the option while
a programme operates.

5.1 

Multitab

Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.

How to activate the Multitab option
1.

Press 

Multitab

, the related indicator

comes on.

If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.

Set the water softener to the highest
level.

2.

Make sure that the salt container and
the rinse aid dispenser are full.

3.

Start the shortest programme with a
rinsing phase, without detergent and
without dishes.

4.

Adjust the water softener to the wa-
ter hardness in your area.

5.

Adjust the released quantity of rinse
aid.

6. 

BEFORE FIRST USE

1.

Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.

2.

Fill the salt container.

3.

Fill the rinse aid dispenser.

4.

Open the water tap.

5.

Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.

ENGLISH

7

Summary of Contents for FAVORIT 55020 W0P

















Reviews: