Press the on/off button. The appliance is not in setting mode when:
– Only one programme indicator light comes on.
– The display shows the duration of a washing programme or a delay start.
– It is necessary to cancel the programme or the delay start to go back to the setting
mode. Refer to 'Select and start a washing programme'.
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in your
area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function
(refer to 'Multitab function').
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. These minerals and
salts can cause damage to the appliance.
Adjust the level of the water softener if this does not agree with the water hardness in your
area.
Contact your local water authority to know the water hardness in your area.
Water hardness
Water hardness ad
-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l
Clarke de
-
grees
manually
elec
-
tronical
-
ly
51 - 70
91 - 125
9,1 - 12,5
64 - 88
2
1)
10
43 - 50
76 - 90
7,6 - 9,0
53 - 63
2
1)
9
37 - 42
65 - 75
6,5 - 7,5
46 - 52
2
1)
8
29 - 36
51 - 64
5,1 - 6,4
36 - 45
2
1)
7
23 - 28
40 - 50
4,0 - 5,0
28 - 35
2
1)
6
19 - 22
33 - 39
3,3 - 3,9
23 - 27
2
1)
5
1)
15 - 18
26 - 32
2,6 - 3,2
18 - 22
1
4
11 - 14
19 - 25
1,9 - 2,5
13 - 17
1
3
10
Use of the appliance