AEG FAVORIT 54861 User Manual Download Page 16

– All other programme indicator lights go off.

– The digital display shows in flashing the programme duration.

4. Close the door.

– The washing programme starts automatically.

You can select the washing programme and delay start also with the door closed. When

you press a programme button you have only 3 seconds to select a different washing

programme or a delay start. After these 3 seconds, the selected programme starts auto

-

matically.

When the washing programme operates, you cannot change the programme. Cancel the

washing programme.

WARNING!

Only interrupt or cancel a washing programme if necessary.

CAUTION!

Open the door carefully. Hot steam can come free.

Cancelling a washing programme

1. Press and hold function buttons B and C until all the programme lights come on.

2. Release function buttons B and C to cancel the washing programme.

At this time you can do these steps:

1. Switch off the appliance.

2. Set a new washing programme .

Fill the detergent dispenser with detergent before you set a new washing programme.

Interrupting a washing programme

Open the door.

• The programme stops.

Close the door.

• The programme continues from the point of interruption.

Setting and starting a washing programme with delay start

1. Press the on/off button.

2. Set a washing programme.

3. Press the delay start button until the display shows on flashing the necessary delay

start of the washing programme.
– The delay start indicator light comes on.

4. Close the door.

– The number on the display comes on with fixed light.

– The countdown of the delay start starts.

– The countdown of the delay start decreases with steps of 1 hour.

– When the countdown is completed, the washing programme starts automatically.

Do not open the door during the countdown to prevent interruption of the countdown.

When you close the door again, the countdown continues from the point of interruption.

16

Setting and starting a washing programme

Summary of Contents for FAVORIT 54861





























Reviews: