AEG FAVORIT 54850 S Instruction Book Download Page 17

Operating instructions

17

In daily use

• Check if it’s necessary to refill with dishwasher salt or rinse aid.
• Load cutlery and dishes into the dishwasher.
• Fill with dishwasher detergent.
• Select a wash programme suitable for the cutlery and dishes.
• Start the wash programme.

Loading cutlery and dishes

Sponges, household cloths and any object that can absorb water
may not be washed in the dishwasher.

Before loading the dishes, you should:
- Remove large left-overs.
- Soften remnants of burnt food in pans.

When loading the dishes and cutlery, please note:
- Dishes and cutlery must not impede the rotation of the spray arms.
- Load hollow items such as cups, glasses, pans etc, with the opening

downwards so that water cannot collect in the container or a 
deep base.

- Dishes and items of cutlery must not lie inside one another, or 

cover each other.

- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.

Plastic items and pans with teflon have a tendency to retain 
water drops; these items will not dry as well as porcelain and steel 
items.

Summary of Contents for FAVORIT 54850 S

















































Reviews: