AEG FAVORIT 45010, User Manual, Page: 47 / 76

Problem Possible cause Possible solution
The detergent can be the cause. Use a different brand of deter -
gent.
The dishes are wet. The washing programme was
without a drying phase or
with a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp -
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on
(this function automatically
deactivates the rinse aid dis -
penser).
Activate the rinse aid dispenser.
To activate the rinse aid dispenser
Make sure that the appliance is deactivated.
1. Press and hold the Multitab button.
2. Turn the programme knob counterclockwise until the programme marker is aligned
with the first washing programme on the control panel.
3. Release the Multitab button when the display shows the set level of the water softener.
4. Turn the programme knob counterclockwise until the programme marker is aligned
with the second washing programme on the control panel.
5. The display shows the set adjustment of the rinse aid dispenser.
The rinse aid dispenser is deactivated
The rinse aid dispenser is activated
6. Press the Multitab button, the display shows the new adjustment.
7. Deactivate the appliance to confirm the adjustment.
TECHNICAL DATA
Dimensions Width 596 mm
Height 818-878 mm
Depth 575 mm
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Water supply
1) Cold water or hot water maximum 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Technical data 47