manualshive.com logo in svg

AEG FAVORIT 44060 VIL, Instruction Book, Page: 35 / 48

Share
Download
AEG FAVORIT 44060 VIL Instruction Book Download Page 35

Operating instructions

35

...the wash results are not satisfactory

The dishes are not clean

●

The wrong washing programme has been selected.

●

The dishes were arranged in such a way as to stop water reaching all 
parts of the surface. The baskets must not be overloaded.

●

The spray arms do not rotate freely due to wrong arrangement of 
the load.

●

The filters in the base of the washing compartment are dirty or 
incorrectly positioned.

●

Too little or no detergent has been used.

●

Where there are limescales deposits on the dishes; the salt container 
is empty or the wrong level of the water softener has been selected.

●

The drain hose connection is not correct.

●

The salt container cap is not properly closed.

The dishes are wet and dull

●

Rinse aid was not used.

●

The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses
and dishes

●

Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●

Increase rinse aid dosing.

●

The detergent may be the cause. Contact the detergent 
manufacturer’s consumer care line.

152965 29/0en  11-02-2004  10:13  Pagina 35

Summary of Contents for FAVORIT 44060 VIL

















































Reviews:

No comments