AEG FAVORIT 44010 VI, User Manual, Page: 12 / 40

1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to posi -
tion 1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher must be in setting mode.
2. Press simultaneously and keep pressed buttons
B
and
C
, until the lights of
buttons
A
,
B
and
C
start flashing.
3. Press button
A
, the lights of buttons
B
and
C
turn off while the light of button
A
goes on flashing. In the digital display will show the current level and a
sequence of intermittent audible signals are heard.
Examples:
displayed, 5 intermittent audible signals, pause, etc... = level 5
displayed, 10 intermittent audible signals, pause, etc... = level 10
4. To change the level, press button A
. Each time the button is pressed the level
changes (for the selection of the new level see the chart).
Examples:
if the current level is 5, by pressing button
A
once, level 6 is selected.
if the current level is 10, by pressing button
A
once, level 1 is selected.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off
button.
12 Set the water softener