22
If you want to use 3in1 products
1.
Press the ON/OFF button.
2.
Press the
3 IN 1
button.
The button indicator lights up: 3in1 function is selected.
Before the start of the dishwashing cycle put 3in1 detergent in the de-
tergent dispenser.
3
As the rinse aid inflow is automatically switched off when the 3in1
function is activated, it may come about because of the different qual-
ity standards in the 3in1 detergent, that the dishes do not dry suffi-
ciently.
If this happens, proceed as follows (see section “Adding rinse aid”):
•
Fill up the dispenser (if this is empty) with rinse aid.
•
Set rinse aid dosage to “2” mechanically.
•
Activate rinse aid inflow.
If you do not want to use 3in1 products any more
If you want to stop using 3in1 products, please do the following:
•
Deactivate the 3in1 function.
•
Fill up the dispensers for salt and rinse aid again.
•
Switch the water softener to the highest setting and perform up to
three normal cycles without loading any dishes.
•
Then set the water softener to the water hardness in your area.
If you want to use 4in1 products
When using "4 in 1" detergents that integrate also anti- glass corrosion
agent into "3 in 1" formula, please follow the same indication as given
for "3 in 1" detergents.