
20
Starting a dishwashing cycle
1.
Check that the spray arms can turn freely.
2.
Turn the water tap on fully.
3.
Close the door.
4.
Press the ON/OFF button.
5.
Select the desired cycle.
The programme display lights up. One or two lights will flash in the
programme progress display.
The selected cycle will begin after approximately 3 seconds.
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely
necessary.
Interrupting the dishwashing programme by opening the dishwash-
er door
1
Hot steam may escape when the door is opened. There is a risk of scald-
ing.
1.
Open the door carefully. The dishwashing cycle will stop.
2.
Close the door. The cycle will continue.
Aborting the dishwashing cycle
1.
Press function buttons
2
and
3
and keep them pressed.
The programme display for the current cycle will flash for several sec-
onds and then go out.
2.
Release the function buttons. The dishwashing cycle has been can-
celled.
3.
If you want to start a new cycle, check whether there is any detergent
in the dispenser.
3
Turning off the dishwasher will only interrupt a selected dishwashing
cycle, not cancel it. The cycle will recommence after turning the dish-
washer back on again.
Summary of Contents for FAVORIT 40730
Page 1: ...FAVORIT 40730 Dishwasher User information ...
Page 42: ...42 ...