AEG FAVORIT 2807 Operating Instructions Manual Download Page 25 | Manualshive

Page: 25 / 40

AEG FAVORIT 2807 Operating Instructions Manual Download Page 25

25

7. Start the programme

Turn the water tap on.

Depress the On/Off push button. The On/Off indicator light will come
on and the machine will start.

8. At the end of the washing programme

At the end of the washing programme the machine stops automatically.

The On/Off indicator light remains on until the On/Off push button is
depressed.

Wait a few minutes before removing the dishes; in this way they will be
cooler and drying will be improved.

Empty the lower basket first and then upper one; this will avoid water
dripping from the upper basket the dishes in the lower one.

Caution!
Opening the door could let very hot steam escape: you risk being
scalded! Open the door with great care.
Do not open the door during the hot phase: this may cause hot
water escape.

Caution!
In general it is not advisable to open the door while the machine
is working; if the door is opened however, a safety device ensures
that the machine stops.

152982 05/1 en 14-04-2000 11:01 Pagina 25

«
...
23
24
25
26
27
...
»

Summary of Contents for FAVORIT 2807









































Reviews:

No comments