AEG F55412VI0 User Manual Download Page 14

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

10.3 

What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1.

Set the highest level of the water

softener.

2.

Make sure that the salt and rinse aid

containers are full.

3.

Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4.

When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5.

Adjust the released quantity of rinse

aid.

6.

Activate the rinse aid empty

notification.

10.4 

Loading the baskets

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not put in the appliance items that

can absorb water (sponges,

household cloths).

• Remove remaining food from the

items.

• Make soft the remaining burned food

on the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that cutlery and dishes do

not bond together. Mix spoons with

other cutlery.

• Make sure that glasses do not touch

other glasses.

• Put small items in the cutlery basket.

• Put light items in the upper basket.

Make sure that the items do not

move.

• Make sure that the spray arm can

move freely before you start a

programme.

10.5 

Before starting a

programme

Make sure that:
• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the

baskets is correct.

• The programme is applicable for the

type of load and for the degree of

soil.

• The correct quantity of detergent is

used.

10.6 

Unloading the baskets

1.

Let the tableware cool down before

you remove it from the appliance.

Hot items can be easily damaged.

2.

First remove items from the lower

basket, then from the upper basket.

At the end of the program

water can still remain on the

sides and on the door of the

appliance.

11. 

CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

www.aeg.com

14

Summary of Contents for F55412VI0

























Reviews: