AEG F45700VI0P User Manual Download Page 16

3.

Wash the spray arm under running

water. Use a thin pointed tool, e.g.

toothpick, to remove particles of soil

from the holes.

4.

To engage again the spray arm to

the basket, press the spray arm

upwards in the direction indicated by

the lower arrow and simultaneously

turn it counterclockwise until it locks

into place.

11.3 

External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 

Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• If you use short duration programmes

regularly, these can leave deposits of

grease and limescale inside the

appliance. To prevent this, we

recommend running long duration

programmes at least twice a month.

• To maintain the performance of your

appliance at its best, we recommend

using a specific cleaning product for

dishwashers (at least once a month).

Follow carefully the instructions on

the packaging of the product.

12. 

TROUBLESHOOTING

If the appliance does not start or it stops

during operation, before you contact an

Authorised Service Centre, check if you

can solve the problem by yourself with

the help of the information in the table.

www.aeg.com

16

Summary of Contents for F45700VI0P

























Reviews: