Water supply
Cold water
2)
min 5 °C
Capacity
Place settings
14
1) Refer to the rating plate for other values.
2) Cold water connection is recommended for best washing performance.
14. INSTALLATION
8 mm
24 mm
1x
E
1x
F
2x
D
4x30 mm
4x
B
C
4x
3,5x16 mm
2x
A
Tools and equipment needed
Installation kit
If floor is not level, adjust
levelling legs to suit
The hose should not be
extended by more than
2 metres or water pump-
out problems may occur
Remove entire plastic
membrane from sink trap
spigot & fit drain hose to spigot
with clamp
There should be a minimum
2mm gap between the top of
the dishwasher and
underside of bench top
Gap on both sides should be
equal, & no greater than
5 mm per side.
Secure dishwasher with
brackets or screws provided
Min. 400 mm straight
section
600mm max
300mm min
400mm
min
DISHWASHER
SINK
POWER OUTLET
Install the appliance under a kitchen
counter.
Put the appliance adjacent to a water tap
and a water drain.
For the venting of the appliance only
water hoses and mains cable openings
are necessary.
Dimensions of the appliance and the
cavity:
www.aeg.com
24
