The automatic heat-up function heats the
cooking zone with full power for some
time.
1.
Turn the knob for the cooking zone
clockwise as far as possible (beyond
the highest heat setting).
2.
Immediately set the necessary heat
setting.
3.
To deactivate the function, turn the
knob to the off position.
5.9
Using the double zone (if
applicable)
To activate the double zone,
turn the knob clockwise. Do
not turn it through the stop
position.
1.
Turn the knob clockwise to position
9.
2.
Turn the knob slowly until you can
hear a click. The two cooking zones
are on.
3.
To set the necessary heat setting
refer to "Heat settings".
6.
CLOCK FUNCTIONS
6.1
Clock functions table
Clock function
Application
Time of day
To set, change or check the time of day.
Minute Minder
To set countdown time. This function has no effect on the op-
eration of the appliance.
Duration
To set the cooking time of the oven.
End
To set the time of day when the oven should deactivate.
You can use the functions
Duration
and End
at
the same time to set the
time for how long the
appliance should operate
and when the appliance
should deactivate. This lets
you activate the appliance
with a delay in time. First set
the Duration
and then
the End
.
6.2
Setting the clock functions
For Duration
and End
, set an
oven function and temperature of
cooking. This is not necessary for the
Minute Minder .
1.
Press again and again until the
indicator for the necessary clock
function starts to flash.
2.
Press or to set the time for the
necessary clock function.
The clock function operates. The display
shows the indicator for the clock function
you set.
For the Minute Minder
function the display shows
the time left.
3.
When the time ends the indicator of
the clock function flashes and an
acoustic signal sounds. Press a
button to stop the signal.
4.
Turn the knob for the oven functions
and the knob for the temperature to
the off position.
www.aeg.com
10
