Themen
63
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault Possible
cause Solution
The power supply light
does not light
No power supply
WARNING:
Before troubleshooting, switch the player off.
Put the mains plug in correctly, if necessary, check the socket is
working with another appliance.
no power supply/ mains switch
switched off
Switch the player on by the mains switch (Fig. 1/1).
No image displayed on
screen
Video cable not correctly connected
WARNING:
Before troubleshooting, switch the player off.
Check the correct fi t of the Video cable
„Connecting the Video cable“
.
Make sure that the jacks are tightly in the sockets.
no DVD/CD inserted
Insert a CD/DVD.
DVD/CD not compatible
Use only compatible media (see
„Technical data“)
.
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty
Clean the CD/DVD around
➯
„Handling CD/DVD“
.
CD/DVD is damaged
Use a different CD/DVD.
Incorrect settings
Check the settings of your DVD-Player.
The child lock system is activated
Deactivate the child lock
„Parental“
.
The wrong TV mode has been se-
lected (no P-SCAN-capable playback
device).
Press the
V-MODE
button (Fig. 3/18) to change the TV mode
(Only possible in stop mode).
No response when
pressing button
Power supply problem or static
charging of appliance
Switch off the main switch and pull out the mains plug. Insert the
mains plug into the socket and switch the player on again.
No sound
Audio cable not connected
WARNING:
Before troubleshooting, switch the player off.
Video plug for transmission of the Video signal, you must use and
Audio cable in addition to the Video cable
➯
„Connecting the Audio
cable“
.
Amplifi er switched off
If you use an amplifi er for Audio output: check whether the amplifi er
is switched on.
Incorrect settings
Check the settings of your DVD-Player.
Volume on the DVD player turned
down.
Increase the volume by pressing the
VOL+
key (Fig. 3/28).
No voice playback via
Scart in the case of
DVDs with AC3 sound
Incorrect loudspeaker settings
Check the loudspeaker settings. Make the following adjust-
ments in the Audio Setup menu:
Front loudspeakers = large
Center loudspeaker = none
Surround loudspeakers = none
The remote control does
not work
wrong direction
The remote control is not pointed towards the DVD-Player.
too far away
Make sure that the remote control is not further than
7 m away from the player.
Batteries empty
Replace the batteries in the remote control
➯
„Remote control battery
installation“
.
DVD cannot be played
DVD has not been fi nalized
Use a fi nalized DVD.
Troubleshooting
05-DVD 4525 AEG - GB 63
24.04.2007, 15:42:07 Uhr
