32
ENGLISH
Switching on and off
In order to switch the device on or off, press the “ “
on/off power switch on the device.
In order to switch between standby and operational
mode, press the “STANDBY “ button on the remote
control.
Carrying out basic settings
Navigating in menus and sub-menus
In order to switch between the menu options, press the
“
►
V+,
◄
V-,
▼
CH-,
▲
CH+” buttons on the remote
control.
To confirm the selected menu option, press the “OK”
button.
The settings for this menu option are displayed.
To move from one setting to the next, press the “
▼
CH-” and “
▲
CH-” cursor buttons.
The selected setting is marked.
By pressing the OK button you jump to the settings
menu.
You may:
- switch between the options with the “
◄
V-,
▲
CH+,
▼
CH-,
►
V+” cursor buttons.
- use the numeric buttons to enter numbers if the
setting requires a numerical input.
Press the “EXIT“ button to change back to the last
menu level.
In order to exit the main menu, press the ”EXIT“ button
repeatedly.
The on-screen menu is closed and the screen is switched
to TV or radio mode.
The system settings must be adjusted to enable you to use
the receiver’s full range of functions (see the following
Chapter).
Press the “MENU” button on the remote control.
Connection schematic
Commissioning
Insert the mains plug of the receiver in a regulation
power socket with PE for 230 V, 50 Hz.
Press the power switch “ “ on the front side of the
device.
Insert the connected devices’ mains plug into the
mains socket and switch these on.
Switch on the AV channel on the TV set.
Please refer to your TV set's operating instructions
for information on how to switch the "AV" chan-
nel on.
Initial Installation
The first time the device is switched on the start window
of the installation assistant appears. With the help of the
installation menu you can easily make the most important
adjustments to the receiver.
Use the “
▼
CH-” or “
▲
CH+” cursor buttons to select
the desired option. Select by using the “
►
V+” or
“
◄
V-” cursor buttons. Start the automatic channel
search with the “red” button.
As soon as the Installation assistant has finished the
search run (100%), the device switches to TV mode.
ТВ-ресивер AEG DVB-T 4544
Купить в интернет-магазине
http://clatronic-shop.com.ua
