The oven light illuminates the main oven when
the Selector is turned to .
The top oven light illuminates when the oven
temperature control is turned.
REPLACING AN OVEN LIGHT
BULB
The type of bulb required is a 300°C, 25 watt
small Edison Screw.
1. Make sure the cooker is cool before you
replace a bulb.
2. Open the oven door and remove the shelves
wirework runners and side panels.
Instructions on how to remove the wirework
runners are given on page 46.
3. Pull the glass bulb cover towards you and
then pull it off. If necessary use a screwdriver
to carefully lever off the cover, taking care not
to damage the oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass
bulb cover.
6. Refit the wirework runners, side panels and
replace the oven shelves.
7. Restore the cooker to the electricity supply
and reset the time of day.
48
THE OVEN LIGHTS
Isolate the cooker from the electricity
supply before replacing the bulb.
Summary of Contents for Competence 5212 BU
Page 1: ...COMPETENCE 5212 BU Build Under Double Oven Operating And Installation Instructions 27 ...
Page 65: ...65 ...
Page 66: ...66 AEG5212 311435404 ...
Page 67: ......