background image

 

3

A - 

Installation check and warnings 

 

 
We invite you to read this instruction booklet carefully, before installing and using the equipment. 
 
If this equipment should be sold or transferred to another person, please ensure that the new user 
receives this booklet. 
 
This appliance complies with the following Directives: 
EEC 90/396(Gas) EEC 89/336(Electromagnetic Compatibility) 
EEC 73/23 e 93/68(Low Voltage) EEC 89/109(Contact with foods) 
 

  NOTE:

 

 

 

The installation must be carried out by experienced and qualified personnel, in conformity with the 
regulations in force. 

 

The equipment has been designed to be used by adults only. Please monitor children closely 
when they’re near the appliance to ensure their safety. 

 

Before powering the equipment, check that it is properly adjusted for the type of gas at disposal. 

 

Before carrying out any maintenance or cleaning of equipment, turn the power supply off and 
allow the appliance to cool. 

 

Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of 
oxygen resulting in possible malfunctions. 

 

In the case of intense or prolonged use of the equipment, it may be necessary to improve 
aeration. 

 

The products from combustion must be discharged outside through a suction hood or an electric 
fan. 

 

For any possible modification, apply to an authorized Technical Assistance Centre for original 
spare parts. 

 

 

WARNING: 

If the appliance is equipped with a glass cover turn off all the burners and wait a few 

minutes before closing the cover.

 

 

The manufacturer refuses all responsibility for possible damages to things or people, resulting 
from incorrect installation or from an incorrect, improper or unreasonable use of the appliance. 

 

GB GENERAL NOTICE 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for CGA 90 WOK













Reviews: