7
Starting up and temperature regulation
Wash the inside of the appliance with lukewarm water with a little bicar-
bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter-
gent as the smell may linger. Dry the appliance thoroughly.
• When the refrigerator compartment door is opened, the internal lighting
is switched on. The temperature control knob is located on the right hand
side of the refrigerator compartment.
Setting “0”:
Off.
Setting “1”:
Hightest temperature, (warmest setting).
Setting “6” (end-stop) :
Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the temperature
inside the refrigerator depends on:
-the quantity of food stored
-how often the door is opened
The temperatures in the refrigerator compartment and freezer compart-
ment cannot be independently regulated.
If you want to freeze fresh food rapidly, select setting “6”, ensuring that the
temperature in the refrigerator compartment does not drop below 0°C. You
should reset the temperature control knob to setting “3” or “4”, if this does
occur.
As soon as the fresh food placed in the freezer has frozen, return the tem-
perature control knob to “3” or “4”.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on
the temperature regulator (position"5" to "6") can cause the compressor to
run continuously.
If this happens, turn the temperature regulator back to a warmer setting
(position "3" to "4"). At this setting the compressor will be switched on and
off as usual and automatic defrosting recommenced.
22
A
D023
Push appliance into the housing
until stop strip (A) touches the
kitchen unit.
Instructions for building-in
D765
Apply joint the sealing strip as shown
in figure.
For a correct alignment make sure that
the distance between the appliance and
the cabinet is of 44 mm.
44 mm
Summary of Contents for C 7 1440 i
Page 1: ...SANTO C 7 14 40 i Integrating Fridge Freezer Operating and Installation Instructions ...
Page 26: ......
Page 27: ......
