English
32
Infrared Remote Control
For wireless control within a distance of 5 m. If the distance
decreases you should change the batteries. For proper
operation mind a clear view between the remote control and
the sensor on the device.
Sound Settings
Select a suitable equalizer setting for the track which is
playing.
• Press the EQ button repeatedly.
(2 on the remote control)
Used to quickly switch off the volume.
Connections
1.
DC IN
Power supply from the mains adapter
2.
SPEAKER
Connect the stereo speaker here.
Follow the colour coding on the wires and
terminals.
3.
AUX IN
This connection can be supplied by a
3.5 mm stereo jack.
4.
AUX IN 1
This connection can be supplied by a cinch
cable (2x RCA).
The AUX IN input cables are not included.
Operation
If you have connected the system and pressed the button,
the indicator lamp changes from red to green. The indicator
lamp shows you the operating mode.
• Press the SOURCE button repeatedly to select the
individual operating modes:
Green
= Radio
Dark blue = Bluetooth
White
= AUX IN 1
Cyan
= AUX IN
Yellow
= USB Function
Radio (Green)
Only FM reception is possible.
1. Press the
or
button. The indicator
lamp flashes. A station is searched for.
2. When a station has been found, the scan stops. The
indicator lamp is lit continuously.
3. Adjust the position of the dipole antenna to improve the
reception of the station.
4. Are you searching for a different station? Press the
or
button again.
5. With FM SCAN: Press this button on the remote. The
next receivable station is played.
6. Press the FM SCAN button again to stop there.
7. The set station will be retained until you search again or
disconnect the system from the mains.
Bluetooth (dark blue)
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (
I
ndustrial,
S
cientific and
M
edical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (
A
dvanced
A
udio
D
istribution
P
rofile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multivendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To remotely control the source, the playback device has to
support the AVRCP profile (
A
udio
V
ideo
R
emote
C
ontrol
P
rofile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
•
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Select Bluetooth (dark blue) with the SOURCE but-
ton. When the system is trying to establish a connec-
tion to another Bluetooth device, the indicator lamp
will flash.
3. Choose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device “AEG
BSS 4828” will show in your player as a selection.
NOTE:
Only one playback unit can be connected to the
speaker. If the speaker is already connected to
another playback unit, the speaker will not appear
in the BT selection menu.
4. Now enter the password “0000” in your player,
depending on the device manufacturers, model, and
software version.
If pairing has been successfully completed, the indicator lamp
will be continuously lit dark blue.
For operation, please refer to the section “Description of the
controls”.
If possible, adjust the volume of the external unit to a com-
fortable level.
