12.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1
Notes on cleaning
Clean the front of the oven with a soft
cloth with warm water and a mild
cleaning agent.
To clean metal surfaces, use a dedicated
cleaning agent.
Clean the oven interior after each use.
Fat accumulation or other food remains
may result in a fire. The risk is higher for
the grill pan.
Clean all accessories after each use and
let them dry. Use a soft cloth with warm
water and a cleaning agent.
Clean stubborn dirt with a special oven
cleaner.
If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick
coating.
Dry the oven when the cavity is wet after
usage.
12.2
Recommended cleaning
products
Do not use abrasive sponges or
aggressive detergents. It can cause
damage to the enamel and the stainless
steel parts.
You can buy our products at
www.aeg.com/shop and at the best
retailer shops.
12.3
Removing the shelf
supports
Before maintenance, make sure that the
oven is cool. There is a risk of burns.
To clean the oven, remove the shelf
supports.
1.
Pull carefully the supports up and out
of the front catch.
2.
Pull the front end of the shelf support
away from the side wall.
3.
Pull the supports out of the rear
catch.
Install the shelf supports in the opposite
sequence.
12.4
Steam Cleaning
Remove as much dirt as possible
manually.
Remove the accessories and the shelf
support to clean the side walls.
The steam cleaning functions support
the steam cavity cleaning of the oven.
Before you start a cleaning procedure,
make sure that the oven is cool.
When the steam cleaning function works,
the light is off.
1.
Fill the water drawer to the maximum
level (around 950 ml of water) until a
signal sounds or the display shows
the message.
2.
Choose the steam cleaning function
in the menu: Cleaning.
Steam Cleaning
- the duration of the
function is around 35 minutes.
a)
Spray a suitable detergent
uniformly in the oven cavity on
both enamel and steel parts.
b)
Turn on the function.
c)
When the programme ends a
signal sounds.
d)
Press a sensor field to turn off the
signal.
e)
Repeat the procedure a second
time if the level of dirt is high.
3.
Wipe the cavity of the oven with a
non-abrasive sponge. You can use
warm water.
After cleaning keep the oven door open
for approximately 1 hour. Wait until the
www.aeg.com
40