![AEG BSE574321M User Manual Download Page 37](http://html.mh-extra.com/html/aeg/bse574321m/bse574321m_user-manual_13070037.webp)
Problem
Possible cause
Remedy
The display shows "C2".
You want to start the Pyroly-
sis or Defrost function, but
you did not remove the core
temperature sensor plug
from the socket.
Remove the core tempera-
ture sensor plug from the
socket.
The display shows "C3".
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
Fully close the door.
The display shows "F102".
• You did not fully close
the door.
• The door lock is defec-
tive.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
The display shows an error
code that is not in this table.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows
"Demo"
.
The demo mode is activa-
ted.
1. Deactivate the oven.
2. Press and hold the but-
ton
.
3. The first digit on the dis-
play and
Demo
indicator
start to blink.
4. Enter the code 2468 by
pressing the buttons
or
to change the val-
ues and press
to con-
firm.
5. The next digit starts to
blink.
6.
Demo
mode deactivates
when you confirm the
last digit and the code is
correct.
ENGLISH
37
Summary of Contents for BSE574321M
Page 1: ...USER MANUAL EN User Manual Steam oven BSE574321M ...
Page 41: ...ENGLISH 41 ...
Page 42: ...www aeg com 42 ...
Page 43: ...ENGLISH 43 ...