Step 4
Hold the door trim (B) on the
top edge of the door at the
two sides and push inwards
to release the clip seal.
1
2
B
Step 5
Pull the door trim to the front
to remove it.
Step 6
Hold the door glass panels on
their top edge one by one and
pull them up out of the guide.
Step 7
Clean the glass panel with
water and soap. Dry the glass
panel carefully. Do not clean
the glass panels in the dish‐
washer.
Step 8
After cleaning, do the above
steps in the opposite se‐
quence.
Step 9
Install the smaller panel first, then the larger and the door.
Step 10
Make sure that you put the
glass panels (C, B and A)
back in the correct sequence.
First, insert panel C, which
has a square printed on the
left side and a triangle on the
right side. You will also find
those symbols embossed on
the door frame. The triangle
symbol on the glass must
match the triangle on the door
frame, and the square symbol
must match the square. After
that insert the other two glass
panels.
A B C
11.6 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
36/52
CARE AND CLEANING
