Step 1
Turn off the oven and wait until
it is cold.
Step 2
Loosen the screw. Pull the front
of the shelf support away from
the side wall.
Step 3
Pull the rear end of the shelf
support away from the side wall
and remove it.
2
1
Step 4
Install the shelf supports in the
opposite sequence.
The retaining pins on the tele‐
scopic runners must point to the
front.
11.3 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Before the Pyrolytic Cleaning:
Turn off the oven and wait
until it is cold.
Remove all accessories except
for shelf supports and tele‐
scopic runners.
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Step 1
Step 2
Step 3
Turn on the oven.
Select: Menu / Cleaning.
Turn the knob to select the clean‐
ing mode. Press the knob to con‐
firm.
Option
Cleaning mode
Duration
Pyrolytic cleaning, quick
Light cleaning
1 h
29/44
CARE AND CLEANING
