AEG BGG18, Original Instructions Manual

Page: 15 / 20

15
15
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
L1820S
AL18G
BL1218
BLK1218
BL18DP2-X5
BL18DPS
BL18S
Use AEG 18V battery and charger only
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
GREASE GUN SAFETY WARNINGS
High pressure can cause some tool parts or hose assembly to rupture, posing a
risk of injection injury and/or amputation. Inspect product and hose assembly for
damage or wear before each use. Do not use if damaged or worn.
Hold the hose assembly by the spring strain relief to avoid kinking the hose.
Grease and lubricants may be flammable. Do not expose to flame or heat source.
Follow all warnings and instructions from grease and lubricant manufacturer.
To avoid damage to the grease gun and pump, the loader fitting must be
compatible with the coupler and rated for at least 690 bar.
Smells from grease or lubricants may cause irritation to the operator’s skin or
respiratory system. Always use personal protective equipment and wear an
appropriate mask.
Always wear goggles when using the product. It is recommended to wear gloves,
sturdy non-slipping shoes and apron.
Remove the battery pack before starting any work on the product.
Do not dispose of used battery packs in the household refuse or by
burning them.
AEG Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only System AEG chargers for charging System AEG battery packs. Do
not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water.
In case of eye contact rinse thoroughly for
TECHNICAL DATA GREASE GUN
BGG18
Rated voltage 18 V
Compatible grease consistency Up to NLGI #2
Hose length 100 cm
Maximum pressure (tested with outlet blocked) 10000 PSI
Thread type
Bulk fill port 1/8”-27 NPTF
Hose coupler 1/8”-27 NPTF
Die cast for hose attachment 7/16”-20 UNF-2B
Flow rate
Low speed 85 g/min
High speed 255 g/min
Grease capacity 450 g cartridge
Weight - not including battery pack 4 kg
Measured values determined according to EN 62841.
A-weighted sound pressure level L
P
A
= 75 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level L
wA
= 86 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Vibration emission value a
h
= 0.8 m/s 2
Uncertainty K 1.5 m/s 2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.