background image

21

21

BATTERY AND CHARGER

Compatible battery pack  

(not included)

Compatible charger  

(not included)

L1815R

L1820R

L1825R

L1830R-X4
L1830R-X5

L1840R
L1850R
L1860R

L1860R-X5

L1890R

AL18G

AL1218G

BL1218

BLK1218

BL18DP-X5

BL18DP2-X5

BL18DPS

Use AEG 18V battery and charger only

 

WARNING! Read all safety warnings and all instructions.

 

Failure to follow the warnings and instructions may result in electric 

shock, fire and/or serious injury. 

Save all warnings and instructions 

for future reference.

ANGLE GRINDER SAFETY WARNINGS

Safety Warnings Common for Grinding, Wire Brushing or 

Abrasive Cutting-Off Operations:

a.  This power tool is intended to function as a grinder, wire 

brush or cut-off tool. Read all safety warnings, instructions, 

illustrations and specifications provided with this power 

tool. 

Failure to follow all instructions listed below may result in 

electric shock, fire and/or serious injury.

b.  Operations such as sanding or polishing are not 

recommended to be performed with this power tool. 

Operations for which the power tool was not designed may create 

a hazard and cause personal injury.

c.  Do not use accessories which are not specifically designed 

and recommended by the tool manufacturer.

 Just because the 

accessory can be attached to your power tool, it does not assure 

safe operation.

d.  The rated speed of the accessory must be at least equal to 

the maximum speed marked on the power tool.

 Accessories 

running faster than their rated speed can break and fly apart.

TECHNICAL DATA

  

 

CORDLESS ANGLE GRINDER

BEWS18BLX180

Rated voltage  

  

 

 18V 

Rated speed  

  

 

 6900 min

-1

Thickness of grinding wheel  

  

 

 6 mm

Grinding wheel diameter  

  

 

 180 mm

Thread of work spindle  

  

 

 M 14

Accessory type

Grinding wheel  

 

 Type 27

Cutting wheel  

 

 Type 41 (Flat disc)

Wire brush  

 

 Type 6

Weight - not including battery pack  

  

 

 4.6 kg

Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
A-weighted sound pressure level  

  

 

 

L

p

 = 86 dB(A)

Uncertainty K  

  

 

 3 dB(A)

A-weighted sound power level  

  

 

 

L

W

 = 97 dB(A)

Uncertainty K  

  

 

 3 dB(A)

Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value 
Surface grinding (Li-Ion 1 x 1,5Ah…2 x 9,0Ah): Vibration emission value  

  

 

 

a

h,AG

 = 7.0 m/s

2

Uncertainty K  

  

 

 1.5 m/s

2

Disk sanding (Li-Ion 1 x 1,5Ah…2 x 9,0Ah): Vibration emission value  

  

 

 

a

h,DS

 ≤ 2.5  m/s

2

Uncertainty K  

  

 

 1.5 m/s

2

For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.

 

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and 

may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level 

represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, 

the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but 

not actually doing the job. This may significantly reduce the exposure level over the total working period. 
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the 

hands warm, organisation of work patterns.

Summary of Contents for BEWS18BLX180





























Reviews: