• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
10.2
Cleaning the cavity
embossment
The cleaning procedure removes
limestone residue from the cavity
embossment after cooking with steam.
We recommend to do the
cleaning procedure at least
every 5 - 10 True Fan
Cooking PLUS cycles.
1.
Put 250 ml of white vinegar into the
cavity embossment at the bottom of
the oven.
Use maximum 6% vinegar without
herbs.
2.
Let the vinegar dissolve the residual
limestone at the ambient
temperature for 30 minutes.
3.
Clean the cavity with warm water and
a soft cloth.
10.3
Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the shelf supports in the opposite
sequence.
The retaining pins on the
telescopic runners must
point to the front.
10.4
Oven ceiling
WARNING!
Deactivate the appliance
before you remove the
heating element. Make sure
that the appliance is cold.
There is a risk of burns.
Remove the shelf supports.
You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
1.
Hold the heating element with two
hands at the front.
2.
Pull it forwards against the spring
pressure and out of two holders.
The heating element folds down.
3.
Clean the oven ceiling.
4.
Install the heating element in the
opposite sequence.
ENGLISH
27
