AEG BE7614000, User Manual

Page: 26 / 32

WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem Possible cause Solution
The appliance
does not heat
up
The appliance is deactiva -
ted
Activate the appliance
The time of day is not set. Set the clock. Refer to "First setting the time of day"
The necessary settings are
not set
Make sure, the settings are correct
The automatic switch-off
is activated
Refer to „Automatic switch-off“
The fuse is released Make sure, if the fuse is the cause for the malfunc -
tion. If the fuse releases again and again, refer to an
authorized electrician
The "Demo" function is on. Deactivate the "Demo" function.
1. Deactivate the appliance.
2. Touch and hold until an acoustic signal
sounds (for minimum 5 seconds).
3. Touch and hold
and at the same time
for 2 seconds until an acoustic signal sounds.
The oven lamp
does not oper -
ate
The oven lamp is defective Replace the oven lamp.
The display
shows C2
You want to start the Keep
warm or Defrost function
but you did not remove
core temperature sensor
plug from the socket.
Remove the core temperature sensor plug from the
socket.
The display
shows an error
code.
There is an electronic fault • Deactivate the appliance with the house fuse or
the safety switch in the fuse box and activate it
again
• If the display shows the error code again, refer to
the Customer Care Department
Steam and
condensation
collect on the
food and in the
appliance.
You left the dish in the ap -
pliance for too long.
Do not let the dishes stay in the appliance for lon -
ger than 15-20 minutes after the cooking is com -
pleted.
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
26 What to do if…