background image

18

818 35 95-02/7

Control and Information Systems

The control and information systems consist of the temperature display, 
an optical warning display and an acoustic warning.
The system warns:
– when first switching on the appliance (when the storage temperature 

has not yet been attained);

– if the appliance door remains open for longer than 80 seconds;
– of excessive temperature in the freezer compartment;
– if there are functional errors with the appliance.

"Open Door" Warning 

If the door remains open longer than approx. 80 seconds, the red 
warning indicator flashes and a warning tone sounds. If you need more 
time for sorting or rearranging frozen foodstuff, you can switch off 
warning tone for 80 seconds by pressing the ALARM OFF button. 
The red warning indicator will go out when the door is closed.

Temperature Warning

The red warning display and the temperature display flashes and an 
audible warning sounds, as soon as the temperature in the freezer com-
partment is warmer than -11 °C. 
A rise in temperature may be caused by:
– frequent door opening for long periods of time;
– loading with large quantities of warm foods;
– high ambient temperature;
– an error with the appliance.

0

 

1.

You can cancel the warning tone with the ALARM OFF button. 
The temperature display for the freezer indicates the warmest 
temperature the freezer has reached during the temperature alarm 
period. After approx. 5 seconds the temperature display reverts to the 
current freezer temperature. The red warning indicator will switch off 
as soon as the temperature has dropped to under -11 °C.

Summary of Contents for Arctis 75248 GA3

































Reviews: