background image

32

32

cause the battery to stop powering the product. Feel the battery 

pack; if it is too warm, allow it to cool down before resuming 

operation. If the product still does not work, recharge the battery.

NOTE:

 The battery pack LED indicator will not work if the battery 

protection feature has caused the battery pack to stop powering 

the product. Release the on-off button or remove the battery pack 

from the product and the battery pack LED indicator will resume 

normal function.
The product also has a tilt protection function. If the product is tilted 

beyond 40°, for about 7 seconds, the product will stop. The product 

will not function if the tilt angle limit is exceeded or if the product is 

in the vertical storage position.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still impossible 

to completely eliminate certain residual risk factors. The following 

hazards  may  arise  in  use  and  the  operator  should  pay  special 

attention to avoid the following:

 

Injury caused by vibration. Always use the right tool for the 

job. Use designated handles and restrict working time and 

exposure.

 

Exposure to noise can cause hearing injury. Wear ear protection 

and limit exposure.

 

Contact with the blades.

 

Injury from thrown objects.

RISK REDUCTION

It has been reported that vibrations from handheld tools may 

contribute to a condition called Raynaud’s Syndrome. Symptoms 

may  include  tingling,  numbness,  and  blanching  of  the  fingers, 

usually apparent upon exposure to cold. Hereditary factors, 

exposure to cold and dampness, diet, smoking, and work practices 

are all thought to contribute to the development of these symptoms. 

There are measures that can be taken by the operator to possibly 

reduce the effects of vibration:

 

Keep your body warm in cold weather. When operating the 

product wear gloves to keep the hands and wrists warm.

 

After each period of operation, exercise to increase blood 

circulation.

 

Take frequent work breaks. Limit the amount of exposure per 

day.

 

If you experience any of the symptoms of this condition, 

immediately discontinue use and see your doctor.

 

WARNING! Injuries may be caused, or aggravated, by 

prolonged use of a tool.

 When using any tool for prolonged 

periods, ensure you take regular breaks.

TRANSPORTATION AND STORAGE

Stop the product, remove the start key, and the battery. Make 

sure that all moving parts have come to a complete stop. Allow the 

product to cool down before storing or transporting.
Clean all foreign material from the product. Store it in a cool, dry, 

and well-ventilated place that is inaccessible to children. Keep away 

from corrosive agents such as garden chemicals and de-icing salts. 

Do not store outdoors.
For transportation, remove start key, secure the product against 

movement or falling to prevent injury to persons or damage to the 

product.

 

WARNING!

 

Use extreme caution when lifting or tilting the 

product for maintenance, cleaning, storage, or transportation.

 

The blade is sharp. Keep all body parts away from the blade while 

it is exposed.

MAINTENANCE

 

WARNING!

 

Use only original manufacturer’s replacement 

parts, accessories and attachments.

 Failure to do so can cause 

injury, poor performance and may void your warranty.

 

WARNING! Servicing requires extreme care and knowledge 

and should be performed only by a qualified service technician.

 

For service, we suggest you bring the product to your nearest 

authorised service centre for repair. When servicing, use only 

original replacement parts.
Remove the start key and the battery before any cleaning or 

maintenance task.
You may make adjustments and repairs described here. For other 

repairs, contact the authorised service agent.
Check the grass catcher frequently for wear or deterioration.
After each use, clean the product with a soft dry cloth. Any part 

that is damaged should be properly repaired or replaced by an 

authorised service centre. 
Check all nuts, bolts and screws at frequent intervals for proper 

tightness to ensure the product is in safe working condition.
Be careful during adjustment of the product to prevent entrapment 

of the fingers between moving blades and fixed parts of the product.

When servicing the blades, be aware that even though the power 

source is switched off, the blades can still be moved.
The blade on the product is sharp. Use extreme caution and wear 

heavy-duty gloves when fitting, replacing, cleaning, or checking bolt 

security.
Replace damaged blades and bolts in sets to preserve balance.

SYMBOLS

Read and understand all instructions before 

operating the product, follow all warnings and 

safety instructions.

Wear ear protection.

Wear eye protection.

Do not operate on inclines greater than 15°. Mow 

across the face of slopes, never up and down.

 

To prevent serious injury, do not touch the cutting 

blades.

Use the appropriate tools for maintenance to 

prevent serious injuries.
Keep hands away from blade.

Do not expose to rain or damp condition.

Beware of thrown or flying objects. Keep all 

bystanders, especially children and pets, at least 

15m away from the operating area.

Beware of sharp blades. Blades continue to rotate 

after the motor is switched off – Remove the start 

key before maintenance.

Always remove the battery pack from the product 

before cleaning, doing maintenance, or leaving the 

product unattended.

To prevent serious injury, keep hands and feet 

away.

Always stop the product before cleaning the work 

place.
Keep children out of the mowing area and under 

the watchful care of a responsible adult other than 

the operator.

Class II tool, double insulation.

Regulatory Compliance Mark (RCM). Product 

meets applicable regulatory requirements.

Waste electrical products should not be disposed 

of with household waste. Please recycle where 

facilities exist. Check with your local authority or 

retailer for recycling advice.

The following signal words and meanings are intended to explain 

the levels of risk associated with this product.

 

DANGER

Indicates  an  imminently  hazardous  situation,  which,  if  not 

avoided, will result in death or serious injury.

 WARNING

Indicates  a  potentially  hazardous  situation,  which,  if  not 

avoided, could result in death or serious injury.

 

CAUTION

Indicates  a  potentially  hazardous  situation,  which,  if  not 

avoided, may result in minor or moderate injury.

CAUTION

Without safety alert symbol
Indicates a situation that may result in property damage.

Summary of Contents for ALM58B





































Reviews: