19
19
INTENDED USE
The cordless hedge trimmer is only intended for use outdoors. For
safety reasons the product must be adequately controlled by using
two-handed operation.
It is intended to cut and trim hedges, shrubs, and similar vegetation.
It should be used in dry, well-illuminated conditions.
It is not intended to cut grass, trees, or branches. It should not be
used for any other purpose than hedge trimming.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power
tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such
as pipes, radiators, ranges and refrigerators.
There is an
increased risk of electric shock if your body is earthed or grounded
Do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling
TECHNICAL DATA
CORDLESS HEDGE TRIMMER
AHT1852B/AHT1852BS6
Rated voltage
18 V DC
No load speed
2700 min
-1
(SPM)
Blade length
550
mm
Cutting capacity
26 mm
Weight (without battery)
3.0 kg
Weight with heaviest battery pack
4.2 kg
Noise emission values determined according to EN 60745-1 and EN
60745-2-15
Sound pressure level at operator’s position
L
pA
= 78.4 dB(A)
Uncertainty
K
= 2.5 dB
A-weighted sound power level
L
WA
= 89.4 dB(A)
Uncertainty
K
= 2.2 dB
Vibration total values determined according to EN 60745-1 and EN 60745-
2-15
Vibration emission value
Front handle
ah
=
2.3 m/s
2
Rear handle
ah
=
4.3 m/s
2
Uncertainty
K
=
1.5 m/s
2
*SPM (strikes per minute) is the number of strokes the connecting rod completes in one minute.
BATTERY AND CHARGER
Model
AHT1852B
AHT1852BS6
Battery pack
Not included
L1860R-X5
Charger
Not included
BL1218
Compatible battery packs
L1815G, L1815R, L1820R, L1825R, L1830R, L1840R, L1850R, L1860R, L1860B, L1890R,
L1860B-X5, L1860R-X5
Compatible chargers
BL1218, AL1218G, BLK1218, BL18DP-X5, BL18DP2-X5
WARNING!
The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.
The declared vibration value may be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can differ from the declared total value depending on the ways in which the tool is
used.
Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.
Summary of Contents for AHT1852B
