background image

3

3

TECHNICAL DATA 

 

ABC58S

TECHNICAL DATA 

 

ABC58S

 

 

Rated output voltage..............................................................................58 V DC
Rated input voltage.................................................................................220 - 240 V, 50 Hz AC
Quick charge current (2.0 Ah).................................................................4 A
Quick charge current (4.0 Ah).................................................................5 A
Battery charging time with 58 V / 2.0 Ah ................................................40 min
Battery charging time with 58 V / 4.0 Ah.................................................65 min
Weight according EPTA-Procedure 01/2003..........................................703 g

 WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

 

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their 
safety. Children should be supervised to ensure that they 
do not play with the appliance.

 WARNING! When using the battery charger, the 

following basic safety precautions should be observed 
for protection against electric shock, danger of injury, and 
burns.

 

Please read and observe these instructions before using 
the device.

 

Ony the following battery packs can be charged with this 
charger:

Type

Rated 

Voltage

Rated 

Capacity

No. of 

Battery 

Cells

Cell 

Type

AB58LI-201

58 V

2.0 Ah

14

Li-ion

AB58LI-401

58 V

4.0 Ah

2 x 14

Li-ion

 

This charger is only to be used indoor under dry conditions.

 

This charger is not intended to charge any other type 
of battery and should never be used in explosive or 
inflammable environments.

 

Non-rechargeable batteries cannot be charged with this 
battery charger.

 

To protect against the risk of electrical shock, do not 
immerse the unit, cord or plug in water or other liquid.

 

Before using the device check that the mains cable and 
mains plug are not damaged.

 

The device must not be damp, and it should not be used in 
a damp environment.

 

Do not use the device if it has suffered any heavy shock or 
jolting, or is damaged in any other way.

 

Due to the heat generated during charging, the battery 
charger should not be operated on a combustible surface 
or in an inflammable environment.

 

Do not cover the ventilating slits.

 

Never disassemble the device yourself. Danger of 

an electric shock or fire could be caused by improper 
reassembly.

 

When the appliance is not in use and before cleaning and 
maintenance, unplug the appliance from the outlet.

 

During charging, the battery pack with charger must 
be placed in a well-ventilated area. Malfunction during 
charging can be caused by storing and operating in places 
where the temperature e40 °C; this should be 
avoided. Battery charging in closed cupboards, near heat 
sources (radiators, bright sunshine) etc., causes heat to 
accumulate and can damage the device.

 

If the battery is not going to be used for a longer period, 
pull the battery off the battery charger and disconnect the 
mains plug.

 

Protect battery contacts to avoid a short circuit caused by a 
metallic object that can cause a fire or explosion.

 

Do not rivet or screw any name-plates or signs onto the 
device. The protective insulation can thereby be rendered 
ineffective. Adhesive labels are recommended.

 

If the mains cord is damaged, it must be replaced by 
the manufacturer, its service agent, or similarly qualified 
persons in order to avoid a hazard.

 WARNING! Do not insert any object into the ventilation 

slots or charging connector.

 This can cause damage to the 

appliance and may increase the risk of personal injury and 
property damage.

 WARNING! Do not alter or modify the unit from the 

original design or function.

 This may increase the risk of 

serious personal injury or property damage.

 WARNING! Before you plug in your product, make 

sure that the supply voltage used corresponds to that 
indicated on the rating plate.

SPECIFIED CONDITIONS OF USE

The product is intended only for charging the 58 V AEG Li-Ion 
battery packs. See TECHNICAL DATA for details.

DESCRIPTION

1. Red LED
2. Green LED
3. Battery port
4.  Key hole hangers
5. Cord retainer
6. Battery pack
7. Latch

Summary of Contents for ABC58S









Reviews: