AEG A18MT, Original Instructions Manual, Page: 19 / 24

19
COMPATIBLE BATTERY PACKS (NOT INCLUDED)
L1820R
L1820S
A18FB2
L1825R
L1830R-X5
A18B4
L1840R
A18FB4
L1850R
A18FB5
L1860R
L1860R-X5
L1890R
Use AEG 18V battery and charger only
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury. Save all warnings and instruction
for future reference.
MULTI-TOOL SAFETY WARNINGS
Hold the power product by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power product “live” and
could give the operator an electric shock.
Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the workpiece by hand or
against your body leaves it unstable and may lead to loss of control.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
The dust produced when using this product may be harmful to
health. Do not inhale the dust. Use a dust absorption system and
wear a suitable dust protection mask. Remove deposited dust
thoroughly, e.g. with a vacuum cleaner.
Remove the battery pack before starting any work on the machine.
Always disconnect the plug from the socket before carrying out any
work on the machine.
Dust from certain paints, coatings, and materials may cause irritation
or allergic reactions. Dust from wood such as oak, beech, MDF, and
others are carcinogenic. Only qualified specialists should be allowed
to use the product on materials containing asbestos.
Do not use compressed air to blow dust or debris. This practice is
dangerous and can cause dirt and grit to be blasted into someone’s
eyes, causing serious injury.
Ambient temperature range for product during operation is between
0°C and 40°C.
Ambient temperature range for product storage is between 0°C and
40°C.
The recommended ambient temperature range for the charging
system during charging is between 10°C and 38°C.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the product. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-
slip footwear, helmet and ear defenders.
The dust produced when using this product may be harmful to
health. Do not inhale the dust. Wear a suitable dust protection mask.
Do not machine any materials that present a danger to health (e.g.
asbestos).
Do not direct the light beam at persons or animals and do not stare
into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
The product is not waterproof. Do not submerge in liquid. Failure to
heed this warning could result in serious personal injury.
TECHNICAL DATA A18MT
Rated voltage 18 V
No-load speed 10,000 - 20,000 min
-1
Oscillation angle left/right 1.6/1.6º
Weight - excluding battery pack 1.04 kg
Measured values determined according to EN 62841.
A-weighted sound pressure level
L
PA
= 81.0 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level L
WA
= 92.0 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Sanding with sanding pad
a
h
= 7.2 m/s
2
Uncertainty K 1.5 m/s
2
Plunge cutting a
h
= 13.1 m/s
2
Uncertainty K 1.5 m/s
2
Flush cutting a
h
= 12.4 m/s
2
Uncertainty K 1.5 m/s
2
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in
accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different
applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may
significantly increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is
running idle. These conditions may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case of vibration), and organising work patterns.