AEG 944188513, User Manual

Page: 4 / 40

•
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
1.2 General Safety
•
Only a qualified person must install this appliance and
replace the cable.
•
Do not use the appliance before installing it in the built-in
structure.
•
Disconnect the appliance from the power supply before
carrying out any maintenance.
•
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre
or similarly qualified persons to avoid an electrical hazard.
•
The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
•
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
•
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
•
Always use oven gloves to remove or put in accessories or
ovenware.
•
Use only the food sensor (core temperature sensor)
recommended for this appliance.
•
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
•
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
4/40
SAFETY INFORMATION