
Problem
Possible cause
Remedy
The oven does not heat up.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali‐
fied electrician.
The lamp does not operate.
The lamp is defective.
Replace the lamp.
The display does not show
the time during the off sta‐
tus.
The display is deactivated.
Touch and
at the
same time to activate the
display again.
The food sensor does not
operate.
The plug of the food sensor
is not correctly installed into
the socket.
Put the plug of the food sen‐
sor as far as possible into
the socket.
It takes too long to cook the
dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
The display shows "C2".
You want to start the Pyroly‐
sis or Defrost function, but
you did not remove the food
sensor plug from the socket.
Remove the food sensor
plug from the socket.
The display shows "C3".
The cleaning function does
not operate. You did not fully
close the door, or the door
lock is defective.
Fully close the door.
The display shows "F102".
• You did not fully close the
door.
• The door lock is defec‐
tive.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart‐
ment.
www.aeg.com
42
Summary of Contents for 944 187 934
Page 1: ...USER MANUAL EN User Manual Oven BPE642020M BPK64202HM BPK642020M ...
Page 46: ......
Page 47: ......