Error code
Possible cause
Remedy
E90 or E91
Internal fail. No communication be‐
tween electronic elements of the
appliance.
The programme was not finished
properly or the appliance stoped
too early. Switch the appliance off
and on again.
If the error code appears again,
contact the Authorised Service
Centre.
EH0
The mains supply is unstable.
When the appliance is showing
EH0, please wait until main supply
is stable than press start. If the ap‐
pliance pause the cycle without
any indication then press the cycle
start. If the warning will occur
check the power cord / socket in‐
tegrity or main supply.
If the display shows other error codes, deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
In case of different problem with the tumble dryer check the table below for possible
solutions.
11.2 Troubleshooting
Problem
Possible cause
Remedy
The tumble dry‐
er does not op‐
erate.
The tumble dryer is not connected
to the mains supply.
Connect it to the mains socket.
Check the fuse in the fuse box (do‐
mestic installation).
The door is open.
Close the door.
The On/Off button was not pushed. Push the On/Off button.
The Inicio/Pausa button was not
touched.
Touch the Inicio/Pausa button.
The appliance is in standby mode. Push the On/Off button.
ENGLISH
23
Summary of Contents for 916099616
Page 1: ...USER MANUAL EN User Manual Tumble Dryer TR818A1OB ...
Page 31: ......
