AEG 911536466 User Manual Download Page 20

11. 

TROUBLESHOOTING

WARNING!

Improper repair of the

appliance may pose a

danger to the safety of the

user. Any repairs must be

performed by qualified

personnel.

The majority of problems that may

occur can be solved without the need

to contact an Authorised Service

Centre.

Refer to the below table for information

on possible problems.
With some problems, the display shows

an alarm code.

Problem and alarm code

Possible cause and solution

You cannot activate the ap-
pliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The programme does not
start.

• Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance recharges the resin inside the water soft-

ener. The duration of the procedure is approximately 5
minutes.

The appliance does not fill
with water.
The display shows 

 or

 .

• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water
authority.

• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.

The appliance does not
drain the water.
The display shows 

.

• Make sure that the sink spigot is not clogged.
• Make sure that the filter in the outlet hose is not clog-

ged.

• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.
The display shows 

.

• Close the water tap and contact an Authorised Service

Centre.

The appliance stops and
starts more times during op-
eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

The programme lasts too
long.

• If the delay start option is set, cancel the delay setting or

wait for the end of the countdown.

• Activating options can increase the programme dura-

tion.

www.aeg.com

20

Summary of Contents for 911536466





























Reviews: