background image

• The indicator of the running

phase is on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1.

Set a programme.

2.

Press 

Delay

 repeatedly until the

display shows the desired delay time

(from 1 to 24 hours).

3.

Press 

Start

 to begin the countdown.

• The indicator 

 is on.

• The remaining time counts down

in hours. The final hour is

displayed in minutes.

When the countdown is completed, the

programme starts and the indicator of
the running phase is on. The indicator 

is off.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry

function.

Do not try to close the

appliance door within 2

minutes after AirDry

automatically opens it, as

this may cause damage to

the appliance.

If, afterwards, the door is

closed for another 3

minutes, the running

programme ends.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.
Press simultaneously 

Delay

 and 

Option

until the appliance is in programme

selection mode.

Cancelling the programme

Press and hold simultaneously 

Delay

 and 

Option

 until the appliance is in

programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

All buttons are inactive except for the

on/off button.

1.

Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2.

Close the water tap.

ENGLISH

15

Summary of Contents for 911524061

























Reviews: