You can turn the selector of
the released quantity (
B
)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
9.1
Using the detergent
30
20
A
B
D
C
20
30
B
A
D
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (
B
) to open
the lid (
C
).
2.
Put the detergent, in powder or
tablets, in the compartment (
A
).
3.
If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (
D
).
4.
Close the lid. Make sure that the
release button locks into position.
9.2
Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1.
Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode and the door is closed.
2.
Press
Program
again and again until
the indicator of the desired
programme is on.
The display shows the programme
duration.
3.
Set the applicable options.
4.
Press
Start
to start the programme.
ENGLISH
61
Summary of Contents for 911514005
Page 71: ...ENGLISH 71 ...
