background image

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.
Settings available in the user mode:

• The level of water softener according

to the water hardness.

• Activation or deactivation of the rinse

aid empty notification.

• Activation or deactivation of AirDry.
As the appliance stores the saved

settings, there is no need to configure

it before every cycle.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

 is on and the display shows the

programme duration.
After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

Press and hold simultaneously Delay

and Option until the appliance is in

programme selection mode.

How to enter user mode

Make sure the appliance is in

programme selection mode.

To enter user mode, press and hold

simultaneously Delay and Option until
the indicators 

 and 

flash and the display is blank.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.
The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.
The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l

Clarke de‐

grees

Water softener lev‐

el

47 - 50

84 - 90

8.4 - 9.0

58 - 63

10

43 - 46

76 - 83

7.6 - 8.3

53 - 57

9

37 - 42

65 - 75

6.5 - 7.5

46 - 52

8

29 - 36

51 - 64

5.1 - 6.4

36 - 45

7

23 - 28

40 - 50

4.0 - 5.0

28 - 35

6

19 - 22

33 - 39

3.3 - 3.9

23 - 27

1)

15 - 18

26 - 32

2.6 - 3.2

18 - 22

4

11 - 14

19 - 25

1.9 - 2.5

13 - 17

3

www.aeg.com

10

Summary of Contents for 911 514 051





























Reviews: