33
… the indicator
f
is flashing
Check whether
–
the pan is located on the correct cooking zone,
–
the diameter of the pan base is too small for the cooking zone,
–
the pan is suitable for induction.
…
_
appears on the display
Check whether
–
the cooking zone has overheated.
switch off the appropriate cooking zone and let it cool down. Try
switching on the cooking zone again using a suitable pan after a few
minutes.
–
the automatic switch-down for the cooking zone has triggered.
You can reactivate the cooking zone by switching it off and on brief-
ly.
… the power function cannot be switched on?
–
Switch off the cooking zone for approx. 10 minutes.
If this fault occurs repeatedly, check
–
whether the requisite ventilation gap between the work surface and
the cabinet panel underneath it has been covered over.
–
that a sufficiently large ventilation gap was maintained under the
work surface when the appliance was installed (5 mm).
